|
1)
|
Importing
from an ABAQUS coupon model and running
Progressive Failure Analysis |
|
|
Importing
from a NASTRAN openhole model and running
Progressive Failure Analysis |
|
|
Progressive
Failure Dynamic Analysis (PFDA) of a
composite plate impacted by a rigid
ball. |
|
|
Demonstration
of a composite laminate subject to four-point
bending according to ASTM D6272 |
|
|
Demonstration
of how to set up the progressive failure
analysis of a composite Advanced Technology
Demonstrator (ATD) structure subject
to static loading. |
|
|
Demonstration
of how to use GENOA-PFDA to simulate
the progressive failure response of
a honeycomb sandwich plate caused by
an impact event. |
|
|
Demonstration
of how to import a GENOA model file
and quickly use the Material Constituent
Analysis (MCA) to determine laminate/ply
properties such as modulus, poisson's
ratio, strength, heat conductivity,
laminate strain, etc. |
|
|
Prediction
of Allowables virtually based on limited
number of test data is implemented in
GENOA by combining progressive failure
analysis with probabilistic analysis.
This exercise shows how to use Option
2 under A&B Allowable module. |